Huzzah!!! Finished!

Yes!  Finished!  The Minx Studio Minotaur ready to go.

Things you have not seen along the way were the chain, which was painted separately, and the marble on the plinth.  That particular kind of plinth is my favorite from Secret Weapon Miniatures.

I had to be very careful with the marble colors.  Too much of a contrast, or too busy, and it begins to overpower the figure!  So, I went with a series of muted greens... mostly the same colors I used on the rocks.

I knew that the marble pattern could flow with the rocks, so I was not worried about that.  It was far more preferable than a simple black or brown color!

I also thought that the marble veins would reflect the action of the swinging chain.

Not long now before the kickstarter goes live!!!!!!!!

He is also on CoolMiniOrNot here:

http://www.coolminiornot.com/358277

Getting there

The Minx Studio Minotaur is getting closer and closer to completion!  I think today will do the trick.

I have been working back into the midtones with the semi transparent layers of paint.  From there, I work a bit lighter still.

This is also the stage where I introduce some 'opposing' colors.  For example, I increased the amount of yellow on the bow, but also more green on the quiver.

That contrasted with all of the reddish colors nicely, and also served to bring some of the cooler gray colors up from the rocks/ground.

I also introduced some more light colors on the horns and face.

More refinement to come, and then it will be time to add flock, grass, etc!

He's a real trooper...

The finished version of the Reaper BONES figure.  As you can see, I added a few diodes to inject some color, as well as a little bit of rust and weathering.

I have a bunch more of these, so I think it will be fun to paint them up in a nice full sized squad. :-)

I guess I will have lots of stuff to bring to Reapercon next year!

Paintin' 'Dem Bones

As I was waiting for other stuff to dry, I slapped some colors on this fun Reaper Bones miniature.

I tossed a few of the spent shells from Secret Weapon Miniatures to enhance the base.  As usual, I start out with the Shaded Basecoat.

And so the glazing begins.  I was not completely sure what color direction I wanted to go.  Originally it was going to be urban camo, but I went with a simpler gray theme instead.

I used a variety of paints here... Reaper liner paints, the Vallejo Black Shade, and Secret Weapon Washes.

I started working back into the midtones...

From midtones to lighter shades.

As I worked in the lighter midtones, I tried to get some nice variation in the grays.  Some were warmer, and others were tinted to be more green, blue, and so on.

This is what it looked like before I added some simple weathering in the form of rust.  I will have the completed pics tomorrow!

Yes, every day still looks like this too.  Groundhog day all over again.  And again.  Shipping disks, shipping more disks.  Remember, if you want to switch from the download to the physical media, just give me a holler at the Gmail address in the last 4 updates.

Working in the shade

That time!  Shade and tint.  Out come the Black shade and liner paints.

Mixing them in secondary batches along the way and thinning them with water and or flow improver, I worked along the lowest edge of the base.

I pulled some of the darker shades up into the rocks as well, mixing in a bit more blue.

I did a lot of wiping away paint with my hand and towel on this.  I would do a few applications of darker paint on the rocks, and dab that away while it was still wet.

I wanted to repeat that blueish gray color on the armor was well, so I saved a bit of that mix for the armor plates.

The glazing is done in stages... not all at once!  This was my first layer on the loincloth.  Many more would follow.

I had some darker glaze colors on the bottom of the leg, so I 'pulled' those up to the upper thigh with a drier brush, turning the figure upside down so that gravity would assist.

Moving up the figure, starting to do the first glazes on the face an mane.

I continued to the upper arm...

I added more glazes to the loincloth and to the face.  Remember, 3-6 light glazes will get you some nice color transitions.  One massive splash of glaze gets you a mess. :-)

Working on the back, mostly the bow, quiver and such. I tried to introduce some green here, so that it would contrast with the cooler reds of the skin tone.

Another layer of dark on the quiver.

Here you can see some major difference in the bottom edge of the loincloth.  That was mostly a mix of red and brown liner paints.

More successive glazes on the back sections.  Some places got as many as 7 or 8.

The semi transparent light glazes are next!

Some Work in progress on the Minotaur

Before I could get some paint on this guy, I had to finish off the base/plinth.  I really love these huge plinths from Secret Weapon.  The metal skeleton is part of a Secret Weapon set for basing.  The red material is Oxide Paste, as usual.

Some primer, and a set of basic colors.  I like to keep the colors simple, doing more mixing and less fooling around looking for the 'perfect' set of colors.

Adding a few more warm colors to the palette, which also lets me create some nice greens.

As with all shaded basecoat adventures... I start out in the middle, and work my way as light as I can.  The idea is to set up the glazing, tinting and shading that comes later.

Working lighter and lighter, creating new colors and shades along the way.

Getting into the brightest lights now.  I never use pure white to do this.  It is always an off white... in this case, I added yellow.

I did some final lights on the metals and a few parts of the skin.

The glazing stage is next!  Stay tuned!

Colonel Klink... you are a dumkoff!

All right, some pictures of the other Germal special units... this time some Gestapo.

This is what they looked like right before the glazes.

Just after the glazing, using the Black Shade from Vallejo, and the various Reaper liner paints.

Details are added, as well as a bit of mud and dirt.

Ready to fight!

To make the initial layers of paint on the hexes, I had a green, a brown and a black.  I used a beat up craft brush to apply the colors, changing the locations and allowing them to blend together.

OK!  We have the Italian unit, the Waffen SS, and now the Gestapo.

Painted vs unpainted.

This image has the Gestapo, the unpainted, and a unit of regulars that Rich painted.

Another shot with a comparison of the regular next to the specials.

Lots of infantry here!  The Americans are on the right.