Hunting Expedition

Now it's time to see some finished images of the Matilda test vehicle!

If you recall the step by step articles, there were a number of experiments conducted with the AMMO paints and pigments.

It was so different working with the oil based products!  Most of the time, I was just seeing what a particular type of paint might be able to do, so I focused more on pushing the limits of the materials.

In the future, I will be working on several tanks and vehicles all at once, which is a better way to take advantage of the oils and their slow drying times!

I have a whole army of Italian vehicles set to go, along with all the German units, so that should be a great opportunity to try more techniques.  I'm also using the oils on my regular infantry, in yet another grand experiment.

I also have an entire Soviet force that will be winter/urban in nature, so we'll see how many different ways we can winterize vehicles.  I'll probably be using a lot of the white Filters, and even mixing the white powders with pigment fixer to scatter that around the vehicles.

I was especially happy with the way the various mud products mixed with the leaves and grass.

This was the one vehicle I had visualized for that effect, and now I can't wait to see what other crazy mixes I can develop!

An yes, there are still some BEF infantry that go along with this tank, so stay tuned!!

The Ranger

I seem to remember painting this Ranger figure for our role playing group many years ago, so it was interesting to work on that same figure again with the knowledge that I have now.  This had been prepped for Marcon, as it is a Sandra Garrity miniature.

There was probably not much freehand on the first version, because it was more difficult at that time to tone down the design in recesses.  I have a few ways to do that now.  

In this case, I used a Vallejo transparent brown paint to create not only some shadows, but to alter the color as well.  This pushed it towards warm, as opposed to the usual cooler dark blues which I have used in many instances to shade such areas darker.

The base is yet another Green Stuff World sculpey base.  There are many more designs yet to be featured on the blog!

The ground level view gives you a better look at the underside details. It was a lot of fun to balance all the warmer reddish browns with the yellowish greens.  To get a little bit of contrast to all that, the color of the base is more of a cooler flesh tone pink.

Blood and Brides

Here's another fun conversion for the Adepticon Dark Eldar army from a few years back.  I wanted to make a unit of Hexatrix Blood Brides, but I thought they should be much different from the usual Wyche figures.

Fortunately, I had some old Warhammer Fantasy Dark Elf figures around, and all it took was swapping one of the knife hands with a plastic gun hand to do the trick!

She's also here:

http://www.ebay.com/itm/322279220899?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Pass Rush

We return to the Blood Bowl pitch with another member of the Samurai Orc team.  This time, a Blitzer!

The new method of sculpting the armor was even more helpful on figures with this kind of positioning of their arms.  When I first converted figures for another version of this team, I did the sections of armor one bit at a time, and that led to some odd angles.  Instead, I was able to make one long strip and work my way across all in one shot.

That created a much more consistent texture, which was ultimately a lot easier to paint than the first team!

Lucky Charms

This 54mm figure was part of a demo at GenCon, showing how to maximize various shades and tones of brown, making them more of less saturated, or more green, yellow, etc.

This is illustrated here, as you see the differences in the hair color and the skirt.  One is more muted and reddish, the other is more saturated and warmer.  The top is more of a greenish brown by comparison.

I tried to incorporate greenish tones wherever possible, even on the skin tones.

These shots show the scale of the figure, and demonstrate how the grayish tones of those bases are designed to set off the figure... despite the relatively muted colors of the figure.  Still, I wanted to add the rust colors in order to bring down the oranges that you see in the hair.

One last look at Lucky!

Turning over a new leaf

So, we enter the final phase of pressing buttons to see what happens!  In the last article, you saw me mixing some unusual combinations of paints, such as the panel washes and other similar materials with the mud effects to create lighter, more opaque midtones.

This image gives you a nice look at the range of colors that I could create.  These were mostly used on the stowage.

They were also used on a few other areas to create some added interest, but mostly to see how well they would mix together for future projects.  A wide range of materials were mixed together as this image shows.

I was really looking forward to trying out the grease and engine oil products.  There's only a few places where you should really use those on any vehicle, but they certainly make the effects convincing!

The consistency and appearance of the engine oil is just that, and when you a very 'dry' base under it, the effect is even more dramatic.  Having the mud/wash opaque mix under the oil on the rear panel accentuated the oil effect in both color value and texture.

Now I had a semi-glossy material on top of something that was almost powdery/dusty in appearance... very cool!

One more view from above to show you how that looked.

The light rust wash is a fantastic color, and just a few touches of it here and there can really pop, especially next to all the muted greens.

There are only so many experiments that I can cram onto one tank, so I definitely wanted to try out the dry pigments!  There's a wide array of colors to choose from.

I picked a few different shades, and set them up in a container lid so I would not get them all over the place.

I put some Pigment Fixer in a lid, and used that to mix in with the powders.  As you can see, the dry powder instantly becomes a paint!  I have done this a lot in the past, even using this technique to paint entire figures.

You can also mix the colors together.

The advantage of working this way is that your 'dry' pigments will be fixed to the surface, with no need to spray them later, etc.

I painted a few greenish streaks on some sections of the hull with this mix, toning down a few of the rust streaks from previous layers.

Now it's time to have fun with the powdery effect!  I used a mix of the light and dark dust on the upper surface of the hull, making it collect in recess areas, as dirt would do.  I also gathered up splotches of  dust and dirt in the tracks and on the vertical sides of the hull (see insert).

OK... we have got a nice dusty look on the sides of the tank!  This illustrates why you have to layer the effects.  It would be very difficult to do the rust and grime streaks on top of this dust without spoiling the effect, which is why that's done first.

Finally, I wanted to add a touch of 'wetter', thicker mud on top of the dust.  Since there will be even less of this material than the dust/dirt, it is saved for the final layer.

I mixed the various types of mud together, as I usually do.  In general, the lighter color mud is supposed to represent dried mud, while the darker mud is 'fresh'.  This means placing the lighter colors first, and the darker, wetter mud on top.

One last experiment!  I wanted to see what would happen if I mixed static grass and other material with these heavy mud products.  I had a few places in mind for this effect, and it worked out even better than I could have hoped!

With the success of the grass/mud mix, I could not resist trying out some parsley flakes!  I wanted to use a thinner mud for this effect... using it to provide more color to the leaves besides green, and to help it adhere to the surface.

I wanted to scatter some leaves on the upper parts of the hull and sections of the tracks.  I even used some of the pigment fixer to aid in this process.  It thinned down the material, making it easier to apply.  Hopefully it will keep it stuck to the surface as well!!

I'm trying to get the leaves to "pile up" on near vertical surfaces, such as the area behind the headlights.

Now to let it all dry... and see what happens.  Stay tuned!!!