Pages

Thursday, March 5, 2015

SSSSSshaded bassssecoat and glazing.


OK... here's something a lot of folks have been anxious to see.

This is the other half of the zombie queen set from the Confederate Rebellion, one of four new factions being created with the Wild West Exodus kickstarter.

This is an interesting shot, as it shows some critical elements.

First, the concept art which must be matched.  Doing so is always a challenge, since the final sculpt is always different, and you don't have the benefit of a 'backdrop'.  This can effect the appearance of a color far more than you might think.

Also, for those of you not familiar with my Shaded Basecoat technique, you see my #8 round craft brushes ready for action!  Each is in a different state of wear.

The more worn out brushes are used to make the initial applications of color, as the point has been worn away, making a nice version of a filbert brush.  The newer, more pristine brushes are for more detailed areas.


Let's begin  I chose a generic grayish green color for the scales, which was lightened with a rotting flesh type color.  A mid tone brown was used for the bindings, and a light grey for the metal parts.  As usual, the Shaded Basecoat begins light, and then gets lighter.

This will be shaded and tinted by subsequent glazes.


And let the Glazing begin!

I use a huge variety of glazing colors... Secret Weapon, Vallejo, and so on.

The approach here is similar to a watercolor painter... in that I concentrate my glazing in tightly controlled applications.


This is normally something I use in my Nurgle mixes, but the swamps demand the addition of this high chroma light wash.  I will mix it in with the Algae for some extra boost.


You ca see that I am working around the metal areas and the bindings.


A substantial difference already!

I have made sure to vary the colors of my mixes... some parts were more brownish, while others were more yellow or blueish green.

It is a lot easier to get this kind of color variation through glazing and tinting as opposed to laborious opaque color mixing.


So, the scales, which had been painted a very basic green color, could be turned warmer or cooler, brighter or more muted, with just the type of glazing color I was using.


The same technique was used on the bindings.  I was even able to incorporate some of the green glazes into the mix, which unified the colors... keeping the browns from getting too out of touch with the green of the scales.


Also, I can apply multiple glazes to a given area to darken it further, or tint it, etc.


A blue/black glaze was created for shading the metal pieces.


Now we have some decent shading, which can be refined much more with semi-opaque applications in those all important middle tones.


These techniques are so central to everything I do, I made sure they were the first two videos created for the Painting Pyramid series of instructional videos.


I like to think of them as the steel framework of a skyscraper.  It provides a lattice upon which I can 'hang' sheets of special effects, such as the RJ-1027 glow, and the Blood spatter!

Stay tuned for the Grand Finale!!!!!


10 comments:

  1. Amazing work and great WIP! Thanks so much for sharing your painting techniques. Awesome !!!

    ReplyDelete
    Replies
    1. Thanks! Part two will be up in a few hours :-)

      Delete
  2. Wonderful James! I gotta say, I love love love the Secret weapon fallout wash. I mix it with their blues for a great Verdigris wash/gaze. It's so bright and fun!

    These photos were really great, as this model is just perfect for your glazing techniques! So much detail to pop and explode with!

    ReplyDelete
    Replies
    1. Many thanks! I had used the fallout mixed with the realistic water to create ichor for Nurgly things... but this was very fun!

      Delete
  3. Oh wow, that's wild James. I can't wait to get through some of my health stuff to get back at painting and modeling up some stuff.

    ReplyDelete
  4. Hello from France ;)

    I discovered your work with your two Land Raiders and your dreadnought that I found really impressive.

    I absolutely love the paint job on your last figurine, and inspires me to paint my Squiggoth :p

    I will go and add your blog on my list not to miss your future posts.

    Best Regards. ;)

    ReplyDelete
    Replies
    1. Merci! :-) There are many hundreds of articles to choose from... Many of these techniques went into my painting video series, since I thought it could save people a lot of time in their painting!

      Delete
  5. Fantastic SBC showcase, makes me want to check it out as an alternative to all that washing and dry brushing... Are your videos available on a pay to view or click to order DVD service somewhere? If not you should look into that - you are quite famous and plenty of us who missed the kickstarter would do that.

    ReplyDelete
    Replies
    1. Thanks! The videos are available for download on CMON, and I handling physical media such as DVD's and usb drives. You can drop me a line of facebook if you would like a usb dive filled with videos! ;-)

      Delete